The post Weartested Awards 2015 – Best Grip appeared first on Weartested - detailed skate shoe reviews.

Sizing

The Vans Rowley Solo runs big, we recommend going a half size down.

Durability

Durability is the a focus point of this model. Vans put a lot of attention to detail in regards to increasing the lifespan of the shoe’s durability. For starters, the shoe features Duracap, which is their technological term for rubber underlays that reinforce the most worn out parts of the shoe. In this specific model, there is noticeable Duracap reinforcement within the toecap, which is much thicker when you compare it to similar models like the Pro Era. Moreover, Vans incorporated the Duracap on the lateral side of the shoe, stitching in triple layered reinforcement that protects the kick flip and Ollie area. Another feature that Vans put attention towards is the tapered shoelace eyelets that made the shoelace durability last much longer. The eyelets start off narrow and ascend into a “V” shape, which successfully prevented grip tape from ripping apart the shoelaces during our 10 hour test. However, even with all the added technical features, the overall durability of the shoe was average; the canvas model ripped through in just after four hours of skating, right where the Duracap reinforcement was. Yet although it ripped quite fast, the reinforcement layers proved to still increase the lifespan of the shoe’s skateability.

Cushioning

The Rowley Solo is equipped with Vans’ ULTRACUSH HD cushioning technology. It is extremely lightweight and PU based (polyurethane), with its overall aim to increase boardfeel without sacrificing cushioning. During the test, cushioning was excellent for your basic flat ground to five stair impacts, but was a bit under equipped for larger stair sets and gaps. With that said, Vans’ offers the ULTRACUSH HD cushioning with a gel inlay for larger impacts in other models like the Pro classics and TNT 5.

Shape

Most vulcanized shoes have a bit of an awkward shape at first when skating. They feel a bit imbalanced with the heavy vulc and the light upper. But the Rowley Solo does a good job maintaining balance all around the shoe. Although the shoe itself looks like a slim fit, it is quite wide in the midfoot section, allowing enough room for your toes to stretch out, but tapers into a rounded point in the forefoot area, securing a snug fit for the foot.

Boardfeel and Grip

The boardfeel of this model was good; cushioning had room for improvement, but the boardfeel was on point. At first, the model was a bit bulky, but after about an hour of skating, the boardfeel improved, most likely due to the ULTRACUSH cushioning absorbing more impact and molding a tighter foot shape. The vulc, as with most Vans models, proved to be extremely grippy. Their classic formula fails to disappoint. However, the vulcanized grip does wear off fast after skating. Initially, the grip connects perfectly with the board for ollies and flicks. But after a while of skating, the vulcanized grip will wear down and slightly taper, affecting the consistency of the flick much more. Although the vulcanized rubber wore down, the Duracap toe piece was fully intact, with no rips and barely any wear. Moreover, the stability of the Duracap toe piece still held its rigid structure, unlike most models that have a toe-piece that become softer and softer after skating.

Comfort and Stability

As aforementioned, the shoe’s shape helps increase the comfort of the shoe. In this model’s case, the comfort gets better and better as you skate more. But there is definitely room for improvement in regards to ventilation. There are ventilation holes that allow airflow for the feet in this model, which means sweat and moisture will get trapped in the shoe as you skate. Trapped moisture within the shoe itself will also affect the shoe’s shape from within, altering most suede toe-caps from flat to wavy. But surprisingly, the Duracap within the toe piece helped prevent moisture absorption as well, so although there was trapped moisture in the shoe, not much affected the actual toe-piece’s structure. As a low-rise profile shoe, the stability is average. Your ankles are left open and exposed, but its low-rise shape allows room for more control for ankle rotation. If you’ve sprained your ankle before, this may not be the best shoe for you.

Summary

The Rowley Solo is the Era Pro’s more skate-adapted cousin, offering awesome comfort and boardfeel while maintaining adequate durability. There is definitely room for improvement in regards to the shoe’s breathability and stability, but overall a well-equipped low profile shoe for your summer skate sessions.

D

Check out the Vans Rowley Solo at ARROW&BEAST

ARROW&BEAST Rowley Solo

The post Vans Rowley Solo appeared first on Weartested - detailed skate shoe reviews.

Etnies

Etnies revealed at the Bright Tradeshow a mix of both very technical and classical models. Etnies has extended the Marana “Bloodline” with the introduction of a vulcanized Marana version, as well as an even more technical Marana model.

Emerica

After Emerica’s perpetual streak of releasing new models in the last two years, it was deemed time to facelift a model, or two. Righteously so, the Reynolds and the popular Bryan Herman Pro Model “G6” have been updated with a classic vulcanized sole. Thus, the Emerica collection has broadened even more and the #HigherQuality campaign starts this year in the next round.

HUF

HUF has outgrown the small shop in San Francisco for several years now and has earned their place in the skateboard universe with not only their clothes, but also their shoe collection. Last year, the team has expanded with the addition of Austyn Gillette and Dylan Rieder. Dylan is known for his extravagant shoe and clothing style, most notably after the release of his model with pre-HUF sponsor, Gravis. HUF was not afraid to back Dylan’s style and has helped design him another unconventional model. In addition, HUF showcased new colors for the already established shoe models and new additions to their clothing collection.

Vans

Vans had one of the largest booths and focused, like many other companies at Bright, on already established models for fall 2014. Our focuses were mainly on the Chima Pro and the recently released Gilbert Crocket Pro model. However, a new model that will be introduced this year will be the AV Classic, an Anthony van Engelen signature shoe. The model features a classic design with a lot of hidden technological attributes such as a Duracap element in the typical ollie-hole area.

DVS

DVS is fully back and that will continue in 2014. They were one of the few companies that presented several new models, including a new model for Chocolate Pro, Chico Brenes. Likewise, Torey Pudwill will get a shoe that comes with a Velcro closure which is aimed to protect the laces and also improve the stability.

Part 2 coming soon…

The post Weartested at Bright Tradeshow: part 1 appeared first on Weartested - detailed skate shoe reviews.